Your Takeuchi TB290

Common jobs for the Takeuchi TB290

The Takeuchi TB290 is an 8.7-tonne midi excavator built for long days in civil works and utility. It has the force for deep trenches and heavy lifts, which means it takes on more than a typical midi machine. On Swedish jobs it runs pipe trenches, foundation work and groundwork for contractors who need a machine that lasts the whole working day.

On a utility job the TB290 digs deep pipe trenches and lays services, on a foundation it digs out and backfills. It grades ground, loads spoil and takes lighter demolition with the right attachment. It covers the chain from pipe trench to backfill and demolition, which makes it a complete machine for medium groundwork jobs.

On the S45 hitch you fit a digging bucket, a sorting grapple, an auger drive and a medium breaker. At 8.7 tonnes the machine carries heavier attachments steadily even well out, and the force lets it manage deep trenches and heavy lifts without losing pace.

Buckets and attachments that fit the TB290

For an 8.7-tonne machine you choose a toothed bucket for excavation and deep pipe trench, a wide grading bucket for levelling and reinstatement, and a narrow cable bucket for tight trenches. On utility jobs the narrow and wide bucket combination is what you use most through the day.

A sorting grapple belongs on the TB290 in demolition and material handling. It loads stone, pulls apart and sorts spoil without you swapping to a bucket. At 8.7 tonnes the machine carries the grapple steadily even well out, which makes it effective when you clear up after demolition.

All attachments run on the S45 hitch, the standard for the midi class. With the same hitch you swap quickly between bucket, grapple, breaker and auger drive and get more out of the machine day on a utility or foundation job.

Hydraulic breaker and heavy attachments for the TB290

An 8.7-tonne machine drives a medium hydraulic breaker for rock, concrete and frost. On utility jobs the breaker is often the attachment that gets you through rock in the deep pipe trench or old concrete without needing a bigger machine on site.

Check the oil flow against the breaker spec before you buy. The TB290 has the flow for a medium breaker, but it has to be matched to your machine hydraulics to hit right and last over time.

An auger drive is useful on the TB290 for post holes, footing piles and planting pits. The drive rotates and the auger bit is the part that sits in it, and you choose the size by the hole. On a midi machine with good force it takes coarser holes without trouble.

S45 quick hitch and fit

The Takeuchi TB290 runs an S45 hitch, the standard coupler for the midi class. Check the attachments are listed for S45 before you buy. With a common hitch you build a set of attachments that all fit and that you swap quickly between tasks.

A tiltrotator can be fitted to the TB290 and gives the bucket more movement, which is worth it on utility and mixed groundwork where you work near services and edges. On pure trenching where the machine does the same thing all day, the money may do more on extra buckets and a good breaker.