What attachments fit a Takeuchi TB2250?

Common jobs for the Takeuchi TB2250

The Takeuchi TB2250 is a 24.5-tonne machine at the top of the large class, made for heavy production, bulk handling and demolition. On Swedish jobs it runs big civil projects, road and demolition where every bucket counts in cubic metres and the machine runs full shifts. It is a machine for the big jobs where volume and endurance weigh heaviest.

On a big road job the TB2250 digs deep trenches, loads dumpers and rips up old sub-base, on demolition it takes concrete and rebar. It often stays in the same kind of work all day, so it pays to have the right attachment fitted and avoid changes mid-production.

On the S70 hitch it drives large digging buckets, heavy demolition breakers, sorting grapples and a ripper, and the attachments should last as many hours as the machine itself. For a machine worked this hard you choose attachments by durability, because downtime on a big job costs more than the tool.

Buckets and attachments that fit the TB2250

For a 24.5-tonne machine you choose large digging buckets for excavation and a wide grading bucket for levelling and slopes. A toothed bucket bites in hard ground, the grading bucket gives an even surface. Bucket size is matched to the machine weight and reach so the front does not get too heavy.

A sorting grapple turns the TB2250 into a strong demolition and material machine. It lifts stone, pulls structures apart and sorts spoil. At 24.5 tonnes the machine carries the grapple steadily even well out from the tracks, which makes it effective in heavy demolition.

All attachments run on the S70 hitch, the standard coupler for the large class. With the same hitch on every attachment you swap quickly between bucket, grapple and breaker during production.

Hydraulic breaker and heavy attachments for the TB2250

A 24.5-tonne machine drives a heavy demolition breaker, and the breaker often decides what the TB2250 can manage in rock and concrete. It must be rated for the machine weight and forces to hit at full effect and last over time.

Check the oil flow against the breaker spec before you buy. The TB2250 has plenty of flow, but the breaker has to be matched to your machine hydraulics. A mismatched breaker hits sluggishly and wears both breaker and machine.

A ripper gets you through compacted ground and rock the breaker cannot manage. It tears up the ground ahead of the bucket, and at the TB2250 weight it makes a real difference on heavy ground that otherwise slows the whole job.

S70 quick hitch and fit

The Takeuchi TB2250 runs an S70 hitch, the heavy coupler for large excavators. Check the attachment is listed for S70 before you order or it will not fit. At 24.5 tonnes the machine puts large forces on the hitch, so the hitch and attachment rating is purely a safety matter.

A tiltrotator works in this class and gives the bucket more movement on mixed jobs near edges and slopes. On pure bulk handling where the machine digs and loads all day, the money often does more on extra buckets and a good breaker.